The Techna-Check PM-1 receives signals from the machine telling it when a part or process is complete, a part is bad, and when the machine is running. This data for each shift is stored in the unit and sent via Ethernet to the Production Monitoring software.
The software will allow you to set your production rate, daily production goals and time a machine is down before an email is sent. Once these values are set the software will display the current number of good parts, bad parts, run time, maximum parts per hour, current parts per hour, percentage of parts per hour, machine utilization and percentage of daily production goal. It also shows what machines are currently online and which machines are not running.
The unit firmware is easily upgradeable through the software if any new features are added.
Typical Electrical InterfaceAdditional Information :